Tooling Innovations Inc

Shrink Fit Tool Holder Cooling Units

Tooling Innovations Inc offers several different units to cool post induction heated Shrink Fit tool holders.  Our cooling units can be used for one Shrink Fit tool holder but are designed to rapidly cool multiple Shrink Fit tool holders at the same time to meet the demands of a production facility.

Air Chiller

Massive amounts of air combined with an aluminum plate quickly remove excess heat from Shrink Fit Tool Holders.  Thirty Cat 40 Shrink Fit tool holders are cooled to the touch in just a few minutes.  The aluminum plates are offered in several configurations for both cat 40 and cat 50 Shrink Fit tool holders.  Mounting the blower and aluminum plate on a cart provides flexibility to move the unit to any location plus the front plate deflects the air downward.  The cart has a padded large lower shelf and a padded upper working area.

Chiller Cart

Our refrigerated chiller cart provides mobility combined with the rapid removal of induction heat from Shrink Fit tool holders.  Refrigerated water is circulated through a thick aluminum plate customized with aluminum inserts sized to contact the outer wall of Shrink Fit tool holders. 

  

Chiller Cabinet

Our Chiller cabinet takes up less space than our chiller cart and is offered in several configurations.  The standard refrigeration unit can produce 9.6 gallons of 50° water per hour when the incoming water is 90° with a 70° room temperature.  Our heavier duty model can produce 19 gallons per hour of 50° water when the incoming water is 90° incoming water with a 70° room temperature.  We also offer a larger recirculating pump with a much larger chilled water reservoir heat sink.  The current version has a convenient front access panel, much larger rear ventilation panel, ventilated side panel, larger diameter insulated pipes resulting in significantly improved air circulation and heat exchange.  The chiller plate is customized with aluminum inserts to fit your Shrink Fit barrel OD.